Last updated: November 2026
Under the California Energy Commission’s 2025 alterations form, Title 24 cool roof requirements apply to a San Diego re-roof only when 50 percent or more of the roof is replaced. Then slope and climate zone decide: steep roofs need a cool roof in zones 4 and 8 to 15, covering inland San Diego County, not coastal zone 7.
Everything below is about single-family homes under the 2025 California Energy Code, which the Energy Commission’s form shows in effect from January 1, 2026. Commercial roofs use a different trigger, covered briefly at the end.
What is a cool roof under Title 24?
A cool roof, in California Energy Code terms, is a roofing product rated for how much sunlight it reflects and how readily it sheds the heat it does absorb. Title 24, Part 6 is the California Energy Code, the part of the state building code that sets energy efficiency rules for new buildings, additions and alterations.
The California Energy Commission’s cool roof fact sheet explains that “Solar reflectance (SR) refers to a material’s ability to reflect the sun’s solar energy back into the atmosphere” and “Thermal emittance (TE) refers to how much of the absorbed heat is released.” The Solar Reflectance Index (SRI) is a single number the code accepts as an alternative way to qualify.
The code asks for aged solar reflectance, meaning the value after the product has weathered. The same CEC fact sheet says only the aged solar reflectance and thermal emittance values listed in the Cool Roof Rating Council (CRRC) Rated Products Directory may be used for compliance, and that rated products carry a CRRC label showing those values.
Cool roofs are not one material. The CEC fact sheet says “There are numerous materials including tile, metal, asphalt, and coatings that meet the cool roof requirements.”
When does a re-roof trigger California’s cool roof rules?
A re-roof triggers the cool roof requirements on a California single-family home when 50 percent or more of the roof is replaced. The CEC’s CF1R-ALT-01-E form for the 2025 code says: “When 50% or more of the roof is being replaced the roofing requirements are triggered.”
Below that line, the form’s roofing requirements don’t apply. Resetting a few slipped tiles is a different job from a replacement.
The CEC’s 2025 Single-Family Residential Compliance Manual defines repairs as “the reconstruction or renewal of any part of an existing building for maintenance purposes,” which sit outside the standards. Replacing a component the code regulates, “such as reroofing,” counts as an alteration instead, and alterations have to meet the code.
The City of San Diego’s Information Bulletin 123 (September 2026) states: “The replacement of a roof covering may trigger compliance with the California Energy Code (CEC).” Whether it does depends on your roof’s slope and your climate zone.
Slope is split at 2:12. The CEC form calls a roof with a pitch of 2:12 or greater steep-sloped and anything under 2:12 low-sloped. A pitched main roof and a flatter section over a patio or garage can land on different sides of that line. Your roofer can measure the pitch from the inspection, and each section follows its own numbers. You can read the full requirements on the CEC’s 2025 prescriptive alterations form.
Which climate zone is your San Diego home in?
San Diego County is not one climate zone. California has 16 building climate zones, and spot checks of the California Energy Commission’s own building climate zone map data put coastal San Diego in zone 7, inland valleys in zone 10, the mountains in zone 14 and the desert in zone 15.
The steep-slope cool roof requirement applies in zones 4 and 8 to 15, which takes in inland zone 10 and leaves out coastal zone 7.
The table shows the CEC zone for single map points we checked in each place, and what the 2025 alterations form requires once a re-roof crosses the 50 percent line.
| CEC climate zone | Map points we checked | Steep-slope roof (2:12 or more) | Low-slope roof (under 2:12) |
|---|---|---|---|
| Zone 7 | Downtown San Diego, Chula Vista, Oceanside | No cool roof requirement | Cool roof required |
| Zone 10 | El Cajon, Escondido, Poway, Ramona, Rancho Bernardo | Cool roof required | Cool roof required |
| Zone 14 | Julian | Cool roof required | Cool roof required |
| Zone 15 | Borrego Springs | Cool roof required | Cool roof required |
Exceptions, covered in the next section, can still change the answer for a steep roof.
Don’t go by city name alone. The City of San Diego itself spans more than one zone: our downtown point came back as zone 7 and our Rancho Bernardo point as zone 10. The CEC notes that where a ZIP code spans multiple climate regions, local jurisdictions may choose one zone for the whole ZIP code.
The reliable check is your exact address in the CEC’s EZ Building Climate Zone Search Tool, then a quick confirmation with your building department.
What are the Title 24 cool roof requirements for steep and low-slope roofs?
For a steep-slope re-roof in climate zones 4 and 8 to 15, the CEC’s 2025 alterations form sets the minimum at “0.20 Aged Solar Reflectance, 0.75 Thermal Emittance, or a minimum SRI of 16.” Low-slope roofs in zones 4 and 6 to 15 face a much higher bar: aged solar reflectance of 0.63, thermal emittance of 0.75, or an SRI of 75.
The steep-slope requirement has exceptions. The same CEC form lists four, and if one applies, the cool roof values don’t have to be met:
- The roof is a mass roof weighing 25 pounds per square foot or more, such as a sod roof.
- The ceiling assembly has a U-factor of 0.025 or less, or R-38 insulation.
- The roof has a radiant barrier that meets Section 150.1(c)2 and is not installed directly above spaced sheathing.
- There is R-2 continuous insulation above or below the roof deck.
Two of those exceptions, R-38 ceiling insulation and a qualifying radiant barrier, depend on what is already in your attic. That is worth checking before you pick a tile color.
Low-slope roofs get a trade-off instead: roof deck insulation lowers the aged solar reflectance target. In zones 6 and 7, the CEC form drops it to 0.60 with R-2 insulation and removes it at R-10.
Roof area covered by building-integrated photovoltaic panels and solar thermal panels is exempt from the cool roof values, but the rest of the roof still has to comply. And a liquid coating used to meet the rule must follow Section 110.8(i)4, which the form says means applying it across the entire roof surface at the manufacturer’s recommended dry mil thickness or coverage.
Do tile roofs and lift-and-relay jobs count?
Tile roofs can meet the cool roof rules. The California Energy Commission’s fact sheet names tile among the materials that can qualify, and what decides it is the specific tile’s CRRC-rated values, whether the tile is clay or concrete.
Lift and relay is less clear. In a lift and relay, the roofer removes the existing tiles, installs new underlayment and flashing, and puts the same tiles back. One of our customers described choosing it this way: “We opted for a lift and relay of existing tile in order to save a a little money on our job.”
The CEC documents we read for this article don’t say how a lift and relay is treated under the 50 percent trigger, and we won’t guess at it here. If you’re in zone 10 or another zone where the steep-slope rule applies, ask the building department how it will treat your job before you plan around reusing tile.
For a wider look at how tile, shingle and metal hold up near the ocean, see our guide to roofing materials for San Diego’s coastal climate.
What paperwork does a San Diego re-roof need for Title 24?
A San Diego re-roof that triggers Title 24 needs energy compliance paperwork alongside the permit. The CEC’s prescriptive form for residential alterations is the CF1R-ALT-01-E. Its roof replacement section asks for the roofing product’s CRRC Product ID Number, taken from the Cool Roof Rating Council’s Rated Product Directory.
Inspections check the result. The CEC’s 2025 Single-Family Residential Compliance Manual says the rough frame inspector should verify “installation of a radiant barrier or cool roof or a combination thereof when required.”
Unincorporated San Diego County’s self-certification checklist (PDS 136, revised August 2025) lists, for re-roofs, “Cool Roof Rating Council product certification, CF2R forms completed and included as necessary.” The City of San Diego has its own process through Development Services, and IB 123 also covers when a re-roof needs a permit at all.
In practice, your roofer should know the climate zone and the trigger before writing the quote. If you’re comparing bids, ask each roofer which zone they used and which CRRC product they plan to list. For a sense of total project cost, our 2026 San Diego roof replacement pricing guide walks through what drives the number.
What about commercial and HOA roofs?
Commercial roofs in California use a different cool roof trigger from homes. The California Energy Commission’s 2025 nonresidential cool roof page says the requirements apply when “more than 50 percent or 2,000 square feet, whatever is less, of the roof is replaced, recovered, or recoated” (Section 141.0(b)2B).
That smaller threshold can catch jobs the residential rule would not, and recoating counts too. The nonresidential values and exceptions differ from the residential ones above.
Pioneer Roofing Company covers this for property managers and HOA boards on its San Diego commercial roofing page, so this article stays focused on homes.
Frequently asked questions
Can I check my Title 24 climate zone by ZIP code?
Yes, but an address check is more accurate. The California Energy Commission publishes a list of climate zone assignments by ZIP code and an online EZ Building Climate Zone Search Tool that looks up a specific address. Because zone lines can cut through a ZIP code, the CEC notes that local jurisdictions may choose one zone for the whole ZIP code. Confirm the zone with your city or county building department before you order materials.
Does replacing part of my roof trigger the cool roof rules?
Not if the replaced area is under half the roof. The California Energy Commission’s 2025 alterations form for single-family homes says the roofing requirements are triggered when 50 percent or more of the roof is being replaced. A smaller repair, such as resetting slipped tiles or replacing one damaged section, falls below that line. A permit may still be needed for other reasons, so check your city’s rules.
Do solar panels affect the cool roof requirement?
Partly. According to the California Energy Commission’s 2025 alterations form, roof area covered by building-integrated photovoltaic panels and solar thermal panels is exempt from the cool roof requirements. The rest of the roof, the area not covered by those panels, still has to meet any cool roof requirement that applies to your climate zone and roof slope. Your roofer should account for both areas on the compliance form.
Can a roof coating be used to meet Title 24 on a house?
Yes, if the coating is CRRC-rated and installed correctly. The California Energy Commission’s 2025 alterations form says liquid field-applied coatings must meet the installation criteria in Section 110.8(i)4. That means the coating is applied across the entire roof surface and meets the dry mil thickness or coverage the manufacturer recommends. A coating on only part of the roof does not qualify.
How we can help
Pioneer Roofing Company handles residential re-roofs across San Diego County, on tile, shingle and metal roofs. Before you choose a material, we’ll tell you whether your re-roof is affected by the Title 24 cool roof rules, based on your climate zone and how much of the roof is being replaced.
As a company standard, all products we install meet the CA Title 24 Cool Roof requirements. And when your tiles are still sound, they can often be re-laid over new underlayment with replacement tiles painted to match.
We’re a family-owned business, licensed in California (C-39 Roofing, License #1060507) and insured. To start, see how our roof replacements work, then request a free quote or call 619-432-7663. Se habla español.


