If you’re not thoroughly convinced, here are four reasons you should hire a professional roofing company instead of doing it yourself: 

1. You are paying for their knowledge and experience and Pioneer Roofing has over 40 Years Experience

Even if you take the time to study everything there is about roofing, it may not be enough to do the work yourself. Professionals are licensed and have years of experience under their belt, which enables them to assess what you need and execute the project effectively. They are experts who have logged hours perfecting their craft, so you know your roof is in good hands. 

Roofing is a complicated task, and it’s not something you can simply experiment with. It will serve you better to delegate the task to professionals now rather than risk further damage and spend more money in the long run to fix the mistakes you made. 

2. You’re getting quality roofing materials

Professional roofing companies know what materials are best suited for your home. More often than not, they also have access to these materials at wholesale costs, given their longstanding relationship with suppliers and manufacturers. When working with experts, you can ensure that the materials used on your home are safe and durable that would last for a long time. 

3. You can save time

Like with any DIY project, roofing can take time—time that you could spend on more important tasks. Most DIY-ers who make an attempt usually have little knowledge before doing the job, rendering them more susceptible to making costly errors. Whereas if a roofing company made a mistake, they know how to mitigate the problem right away without asking you to spend more money. 

Experimenting with your DIY abilities is fine, but it would be wiser not to do it on your roof. When you hire a professional, they already know what problems to address and how to fix them. With their years of experience, they know how to get things done efficiently in the shortest time possible. 

4. It’s much safer

Even if you consider yourself the most cautious person on earth, you can’t rule out the possibility of falling. People fall off their roofs and sustain life-threatening injuries. You don’t want to be one of them.

Professional roofing companies typically deploy people who are experienced in working on roofs and possess the proper tools to ensure safety. These people are cautious and vigilant, capable of paying attention to their surroundings while focusing on the task at hand at the same time. If you’re a DIY-er, you may not be as capable as them. 

A roofing project may sound exciting, tempting you to go the DIY route. However, keep in mind the factors above that make it best to leave the roofing project to professionals. 

With more than 40 years of experience under our belt, Pioneer Roofing Company in San Diego can take care of your new roof or repair work. Get in touch with us today.

The post 4 Reasons Why You Should Hire a Professional Roofing Company appeared first on Pioneer Roofing Company.

Once the roof starts to show its age and lose its strength, the chances of water seeping inside your home will be high. Once your roof starts to give in, leaving it unattended will pour more problems one on top of another and compromise the house’s structure.

This can be a plethora of mold contamination, rotted framing, sheathing, destroyed insulation, and overall damaged ceilings. To keep your home’s condition through the roof, check out the guide below to help maintain a leaking roof. 

Step #1: Check the Area

The first step to fixing a leaky roof is to check for damages within the area. In most cases, typical households will experience leakage in their attic, so be sure to head up and give it a thorough look. 

After that, you will need to clear the insulation from the wet ceiling and then dry off any signs of water. You can quickly do achieve this by placing a small piece of plywood throughout the joists of your roof. Finally, hook on a bucket on it to catch the water drippings. 

Step #2: Locate the Leak

By placing the bucket, you can find the leak by following the position or root of where it enters your roof. It may be challenging to follow the path along the beams as water can slide from the base of the roof deck. 

To that end, there’s a trick to finding leaks. Start by asking a friend to go up the roof with a garden hose. Next, soak the area where the hole appears above the house, which should help you isolate the field and track the leak down to its source in no time. You’ll know it’s the right spot when you see a discolored felt paper or rotted wood below and around the affected space in your roof.

Step #3: Measure the Leak’s Distance

Another way of fixing a leaky roof as accurate as possible is to measure the distance of the roof leaf from the ridge and the gable. This will allow you to track the leak once the weather calms down. 

When the skies are clear and dry, measure the dimensions of your roof and strengthen the base of the shingles by adding tar to keep leaks in check. This is highly beneficial, as flashings and shingles tend to be the most vulnerable to leakage. 

Step #4: Examine the Roof from the Inside

When inspecting the rafters and beams of your attic, professional roofing manufacturers suggest using a flashlight to help brighten up the room. This will enable you to check for soft spots, wet wood, water stains, or any dampness that redirects you to the origin of the leak. Once you locate the leak, mark the area by using chalk. Finally, add a wire through the affected area and out through your roof. 

Step #5: Examine the Roof from Outside

By sticking out a wire through your ceiling from the inside, you can now easily find the source of the leak outside and on your roof. This enables you to observe the structure for any traces of broken shingles, loose nails, or any form of aging. To that end, locating the leak should help you prepare for the necessary repairs down the road. 

The Bottom Line

Prevention is always better than a cure, and in this case, keeping a careful watch of the state of your roof should help you avoid severe damages and costly repairs. The steps above should protect your roof from further deterioration in the long run. Of course, hiring a professional is the better option for your waterproofing needs as it ensures quality and long-lasting results!

If you’re looking for a residential roofing service in San Diego to help replace your old roof, get in touch with us today for a free consultation.

The post Our Guide to Preventing Water Leaks from Your Roof – What to Know appeared first on Pioneer Roofing Company.

Once the roof starts to show its age and lose its strength, the chances of water seeping inside your home will be high. Once your roof starts to give in, leaving it unattended will pour more problems one on top of another and compromise the house’s structure.

This can be a plethora of mold contamination, rotted framing, sheathing, destroyed insulation, and overall damaged ceilings. To keep your home’s condition through the roof, check out the guide below to help maintain a leaking roof. 

Step #1: Check the Area

The first step to fixing a leaky roof is to check for damages within the area. In most cases, typical households will experience leakage in their attic, so be sure to head up and give it a thorough look. 

After that, you will need to clear the insulation from the wet ceiling and then dry off any signs of water. You can quickly do achieve this by placing a small piece of plywood throughout the joists of your roof. Finally, hook on a bucket on it to catch the water drippings. 

Step #2: Locate the Leak

By placing the bucket, you can find the leak by following the position or root of where it enters your roof. It may be challenging to follow the path along the beams as water can slide from the base of the roof deck. 

To that end, there’s a trick to finding leaks. Start by asking a friend to go up the roof with a garden hose. Next, soak the area where the hole appears above the house, which should help you isolate the field and track the leak down to its source in no time. You’ll know it’s the right spot when you see a discolored felt paper or rotted wood below and around the affected space in your roof.

Step #3: Measure the Leak’s Distance

Another way of fixing a leaky roof as accurate as possible is to measure the distance of the roof leaf from the ridge and the gable. This will allow you to track the leak once the weather calms down. 

When the skies are clear and dry, measure the dimensions of your roof and strengthen the base of the shingles by adding tar to keep leaks in check. This is highly beneficial, as flashings and shingles tend to be the most vulnerable to leakage. 

Step #4: Examine the Roof from the Inside

When inspecting the rafters and beams of your attic, professional roofing manufacturers suggest using a flashlight to help brighten up the room. This will enable you to check for soft spots, wet wood, water stains, or any dampness that redirects you to the origin of the leak. Once you locate the leak, mark the area by using chalk. Finally, add a wire through the affected area and out through your roof. 

Step #5: Examine the Roof from Outside

By sticking out a wire through your ceiling from the inside, you can now easily find the source of the leak outside and on your roof. This enables you to observe the structure for any traces of broken shingles, loose nails, or any form of aging. To that end, locating the leak should help you prepare for the necessary repairs down the road. 

The Bottom Line

Prevention is always better than a cure, and in this case, keeping a careful watch of the state of your roof should help you avoid severe damages and costly repairs. The steps above should protect your roof from further deterioration in the long run. Of course, hiring a professional is the better option for your waterproofing needs as it ensures quality and long-lasting results!

If you’re looking for a residential roofing service in San Diego to help replace your old roof, get in touch with us today for a free consultation.

The post Our Guide to Preventing Water Leaks from Your Roof – What to Know appeared first on Pioneer Roofing Company.